ROADPASSION AUTOMOTIVE TECHNOLOGY (GUANGZHOU) CO., LIMITED
RoadPassion Specializes in Driving Safety
Add to Cart
Rear Camera For BENZ NTG4.5 Front View Backup Camera Kit Update Reverse Multimedia Video Interface
What is camera decorder video interface?
Camera interface is a decorder making to dedicated to fit with car factory screen, while decoders do serve the purpose of integrating IP cameras into a digital video recorder-based system, they also allow older monitors to show video footage. Which can help you to see very clearly the surrouding via front camera and rear camera.
Car camera multimedia video interface allows to connect two cameras to car's factory LCD monitor, it dedicated to design for AUDI NON MMI A4 A5 Q5 Cocert Symphony system, including the dedicated fit LVDS cable, power CANBUS cable, camera RCA connector, as well as a main unit. Everything design is for no harmness installation, just plug and play. After installation, you can see the camera view via car's factory screen to assist parking with dynamaic parking guidelines moving with the steering wheel. Which is neccessary and safe for each car.
A backup camera interface is integrated a camera that turns on when you put your vehicle in reverse. Camera Interface now offers a range of cable adaptors to allow an after-market camera to be connected to the OEM factory radio. These are a great way of adding some much needed parking assistance to your factory radio. Please read the listing description carefully as coding and variants with the factory radio may apply. When a reverse camera is connected via a video interface, it is activated through a CAN bus or using the +12 V from reversing lights lamps.
Package Contents:
1 * Interface main unit
1 * LVDS cable
1 * Power cable
1 * Camera inputs harness
1 * Rear handle camera (optional)
1 * Camera extensive cable
1 * Camera power & GND wire
Car Camera Multimedia Video Interface Features:
Designed For: For 2009-2014 Mercedes-Benz NTG4.5 A/B/C/E/CLS/SLS/GLK/ML/GL/GLA series
Plug & Play: Yes
IPAS (Moveable Gridlines): Yes
Auto switching: Yes
Optical Park Overlay: Yes
Camera Input: Front & Rear (Included)
Coding Required: Not Required
Camera Multimedia Video Interface Functions
| 1. Firmware can be updated by micro SD card |
| 2. Plug&Play interface and no harmness to any cable |
| 3. LVDS output support 800x480, 400x24, or 1024x480 screen |
| 4. Dynamic Parking Guidelines with original Radar-detection image |
| 5. Front camera (DVR optional) &Rear camera inputs and auto-switch |
| 6. Comptible Camera Format: NTSC Format |
| 7. Overlay car's factory parking sensors |
| 8. Support Camera input, DVR &front camera |
| 9. For 2009-2014 Mercedes-Benz NTG4.5 A/B/C/E/CLS/SLS/GLK/ML/GL/GLA series |
| 10. Installation guide provided |
Camera Multimedia Video Interface Parameter
| Operation voltage | 7V – 25V |
| Stand-by power drain | <10mA |
| Video input | 0.7V - 1V |
| Video input formats | NTSC |
| RGB-video amplitude | 0.7V with 75 Ohm impedance |
| Temperature range | -40°C to +85°C |
| Dimensions video-box | 113×22×92 mm (W×H×D) |
| Dimensions CAN-box | 73×22×30 mm (W×H×D) |
